All of the parts and pieces are now completed. Next step is attaching the back i.e 'boxing em up"
I sanded a 12 foot radius into the fret board with this sanding block. Makes the playing a little easier I think.
This is what the fret board will look like on the finished instrument. I must install the frets before glueing it on.
This uke needs tentalones along the bottom
and this is how they are glued and clamped. Neat little spring clamps I found at Grizzly, Better than the clothe pins I used to use.
So here are all the parts and pieces. Its just a matter of getting them connected.
