Making good progress on several fronts. lloyd's 146 is getting quite shiny as more and more French Polish is applied. The concert pinecone for PJ has its frets, fretboard and now the pinecone peghead plate and Mo's big baritone has bindings all around.
The end piece is nicely fitted and taped down tight as the glue sets up.
The carbon fiber rod is epoxied into its groove and held down tight as the epoxy cures.
Oh yeah, after fitting that end piece with rasp, scraper and sandpaper it is looking good.
And here is the pinecone with nut and Dung Beetle
So these two ukes are in the living room for the nightly inspection. They both need some sanding, the baritone will get its fret board tomorrow, and these two will soon be ready for their French Polish. Then a couple more builds will begin. Moving right along.