Here are all the parts required to build a concert "Pinecone" sans the nut, saddle bridge and tuners. Can you figure out what each is and where it goes? Maybe the next picture will get you started.
This picture has the two braces set in place, the walnut backing plate for the bridge and the butt plates sitting where they will eventually be glued. The three pieces of cedar with big holes will be cut down to fit and glued behind the sound hole to strengthen it. I have made good progress to this point. I think I will work on getting the necks ready to attach to the sound-board first. Maybe I will have a little time tomorrow to do that.