Before you can attach the lower tentalones you must trim the sides to their proper shape. That is done with these little planes.
 |  |
That done the tentalones can now be glued on.
And after the glue is dried they are ready for the next step, Putting in the Side Sound Ports.
 This is a patch that will be put in behind the side sound port.  now Its ready to punch out.  The wooden collar selected to match the wood of the neck.  |  The hole is roughed out with a drill bit in in Dremel  And here it is, ready to fit the collar  The hole is carefully shaped with a sanding disk on the Dremel- and now it fits into the hole.  And the collar is set in with super glue. Now it is just a matter of sanding. |
And now 144 and 145 are ready to receive their backs, To be "boxed up"
